Skip to main content

Paint prep · The Bronx, NY · 18 mi from Newark

Paint scraping and exterior prep in The Bronx, NY.

Paint scraping and exterior prep in The Bronx, NY runs the same flat $50/hr per person rate — siding, trim, porches, garage doors, decks. Newark crew, carbide scrapers + HEPA-extracted sanders. Bundle with power-washing for the full prep stack.

The Bronx pattern

Paint prep in The Bronx, in practice.

The Bronx mixes leafy single-family Riverdale — Tudors, slate walks, big lawns — with dense walk-up cleanouts in Mott Haven and Fordham. Pelham Bay and Throgs Neck homes have full driveways and back yards on the water side; City Island is its own thing with cottage-style homes.

Single-family Tudors and stone colonials in Riverdale; pre-war walk-ups in Mott Haven and Fordham; capes and split-levels in Pelham Bay and Throgs Neck.

Newark to the Bronx is roughly 18 miles via I-95 and the GW Bridge — 35 to 50 minutes off-peak.

Pricing in The Bronx

Real paint prep jobs, real numbers.

  • Front porch railing + balusters (≈20 linear ft, full strip) — 3 hours, 2 crew, $300 total
  • Garage door scrape and sand (single bay, 9x7) — 2 hours, 1 crew, $100 total
  • South-facing siding strip (one elevation, ranch house) — 6 hours, 2 crew, $600 total
  • Exterior trim prep (full house, eaves + windows + doors) — 5 hours, 2 crew, $500 total

No travel fee inside our service area — The Bronx is 18 miles from Newark and already covered.

Paint prep questions

Common paint prep questions.

Why hire a separate prep crew if I already have a painter?

Most painters quote prep as "light scuff and prime" — which works on previously-clean surfaces and fails on the ones that needed actual prep. Hiring us to do the heavy scrape and sand means your painter shows up to a true-to-substrate surface, paints once, and the coat lasts the full warranty. The two-trade approach is cheaper than a re-do.

Do you handle lead paint?

We do the surface prep, and we coordinate the EPA RRP-certified piece for any work on a pre-1978 house. The lead-safe work practices — containment, HEPA cleanup, lab swab testing — are handled by a partnered certified contractor. We do not freelance on lead-paint regulations.

Can you do this before a power wash, or after?

After is the right order. Pressure-wash first to remove the loose chalk and mildew, let the surface dry 48 hours, then scrape and sand to bare or solid substrate. We can bundle the pressure-wash into the same multi-day visit if you book both services.

How do you handle the dust?

HEPA dust extraction on the orbital sanders means about 95 percent of the sanding dust gets captured at the tool. The remaining 5 percent is what catches on drop cloths and plant beds. We tape off, pull drop cloths, and do a HEPA-vac walkthrough at the end of every day. For pre-1978 houses, we follow the EPA RRP cleanup checklist verbatim.

See the full paint prep guide →

Coverage map · live

The Bronx, NY sits inside our daily run.

Same flat $50/hr rate from our Newark base out to The Bronx and the rest of the 50-city map. Tap any pin or service to explore the network.

NEWARK · BASE
50 cities · NJ + NYC
Home base Newark, NJ 07102
  • Home base
  • NJ city (45)
  • NYC borough (5)
Book your area

By region

NJ counties we hit weekly

  • Essex
  • Hudson
  • Bergen
  • Union
  • Passaic
  • Morris

NYC boroughs

  • Manhattan
  • Brooklyn
  • Queens
  • Bronx
  • Staten Island

Outside the lines? Email hey@bricklabor.com — we travel.